Precautions for the use of rice milling machine
The layout of the parts of the traditional refined rice machine is unreasonable, the process is backward, the airflow through the refined rice is insufficient, the wind pressure is low, the grain sinks into the bottom of the refined rice under the effect of its own weight, the fluidity decreases, and the existing refined rice movement area is not fully utilized. In order to improve the processing of rice, it is necessary to use a self-service rice mill or two self-service rice mills to increase the gravity inside the refined rice, but it will cause the temperature of the rice to rise, and the high violent walking rate of the original rice will produce a large amount of rice flour in the process of the rice mill. Therefore, in order to reduce the rice flour rate and improve the rice, a multi-phase warping process is adopted.
With the gradual improvement of living standards, people put forward higher requirements for rice, which rapidly improvedrice millProcess. With the continuous improvement of rice varieties, the yield of slender rice is getting higher and higher in recent years. During the harvest and threshing of this kind of rice, due to its own reasons, a large number of explosive waist phenomena will occur. Due to the backward technology of the traditional refined rice machine, the rice flour rate may be improved.
The layout of the parts of the traditional refined rice machine is unreasonable, the process is backward, the airflow through the refined rice is insufficient, the wind pressure is low, the grain sinks into the bottom of the refined rice under the effect of its own weight, the fluidity decreases, and the existing refined rice movement area is not fully utilized. To improve the processing of rice, you need to use a self-service machine.rice millor two self-servicerice millTo increase the gravity inside the milled rice, but it will cause the temperature of the rice to rise, coupled with the high outbreak rate of the original rice, a large amount of rice flour will be produced during the rice mill. Therefore, in order to reduce the rice flour rate and improve the rice, a multi-phase warping process is adopted.
rice millThe process is to increase the number of refined rice machines, increase the movement area of refined rice per unit output, but reduce the internal gravity of each refined rice machine, adjust the temperature of rice grains when refined rice, reduce the crushing rate, and improve processing. The cost may increase sharply. In order to reduce the cost and improve the processing of rice, a new type of refined rice machine was developed, which improved the utilization rate of the moving area of the refined rice per unit output and the air volume penetrating the refined rice, and greatly reduced the crushing rate. The milled rice process of brown rice is to peel off the rice bran layer by friction and grinding. Friction milled rice is because polishing requires high gravity and a certain polishing speed, so friction milled rice is also called gravity milled rice. Because the ground rice does not require high gloss gravity, requires high linear speed and fine blade more refined rice drum, so the ground refined rice is also called speed refined rice. In fact, in any refined rice machine, these two ways of refined rice exist at the same time. However, due to the different structure and parameters of the refined rice machine, any self-service rice mill has an effective way of refined rice. Therefore, the refined rice machine can be divided into friction type refined rice machine (iron roller refined rice machine) and grinding type refined rice machine (sand roller refined rice machine).
rice millWhat are the considerations?
Before the brown rice enters the floor, check for metal objects and stones to prevent damage to the grinding wheel.
2. After straightening, pull the rotating block in front of it and wipe the remaining inner rice sugar clean, so as not to affect the accuracy of the sample.
3. The positive white accuracy should be determined according to the number of samples and positive 100 hours of brown rice varieties. The number of samples with lower accuracy should be 17-18 grams, and the positive 100 hours should be slightly shorter. The number of high-precision samples is 20 grams, and the crushing time is slightly longer.
4. After the machine is used for time and high moisture brown rice, when the rice bran combines with the grinding wheel to affect the whiteness, remove the grinding wheel with a plate hand, remove the bran powder with a steel wire brush, and then put it back intact to continue to use.