The advantages of the new combination of rice milling machine is introduced, come and collect!

Release time:

2022-11-02

The whole set of new combined rice milling machine is composed of inch rubber roller husker, coarse grain separation screen, sand roller rice milling machine, broken rice separation screen and lifting device. It has the effect of separating and grinding brown rice, simple operation, convenient maintenance, and work efficiency High, less residue. The machine has the function of brown rice straight out, providing users with flexible functional collocation. At the same time, the new combined rice milling machine can be used with subsequent white rice multi-stage separation screen, polishing machine, color sorter, etc. to obtain more functions and better Rice milling effect. So, what are the advantages of the new combination of rice milling machine? Here to introduce.

1. The separate design of removing impurities and stones is much better than the traditional integrated design;

2. The impurity removal part adopts multi-layer reciprocating vibrating screen mechanism, which has high impurity removal efficiency and cleans up;

3. The stone discharge part adopts the design of large wind and large suction, with large air volume and good stone discharge effect;

4. The fuselage is equipped with high-strength damping bearings, so that the movement is stable, firm, reliable, low vibration, low noise, less dust. The invention combines the variable speed reducer and the moving roller device into one, avoids the coordination problem of the swing gear, the one-time shell breaking rate exceeds 90%, the rubber roller has a longer service life, convenient operation and adjustment, high transmission efficiency, and less noise. High stability.

What is the operation method of the new combined rice milling machine? Continue to introduce you below.

1. Put the rice mill on the workbench, plug in the power, determine the whitening time and adjust the timing knob.

2. Take out the pressure in the hopper, put 17-20g of brown rice (moisture content shall not exceed 15%) into the hopper, let it flow into the whitening chamber, press the power button to start, and then reduce the pressure.

3. After the specified time, the rice milling machine will automatically stop. First, take out the hopper and remove the chaff. Then plug in the funnel, take out the pressure, turn the front to smell the pure fragrance, turn the front handle to the right, turn the handle to the right, make the refined rice in the rice milling room fall into it, turn the timing knob to the 0 position, press the power key, let the grinding wheel idle for a few seconds, make all the rice grains in the whitening room fall off, then pull out the rice bucket and sift through to get the measured refined rice.

4. Idle for 1-2 minutes before feeding. The chaff discharge channel is set up on the body, and the recycling of scattered chaff is reformed in combination with the environmental protection department.

What are the application areas of the new combined rice mill? The rice mill is mainly used for milling rice millet, sorghum, and can also be used for corn, wheat, barley, mung beans, buckwheat, soybeans, millet and other cereals, ground skin seeds, fenu, coix seed. The shelling machine is equipped with grinding wheel, screen and rice mill, the lower part of the machine base is equipped with fan, and the machine body is evenly distributed with chaff discharge channels. It is characterized in that the main shaft of the grain thresher is spliced by a long shaft and a short shaft, and the splicing gap is provided with bearings and is respectively connected with the motor. The wheel on the long shaft is larger than the pulley on the short shaft, and the fan is installed at its lower part.