The entire new type of combined rice mill is composed of an inch rubber roller dehusker, a coarse grain separation screen, a sand roller rice mill, a broken rice separation screen and a lifting device. It has the effect of separating and grinding brown rice, is easy to operate, convenient to maintain, has high working efficiency and leaves less residue. This machine has the function of direct output of brown rice, providing users with flexible functional combinations. Meanwhile, the new combination rice mill can be used in conjunction with subsequent multi-stage separation screens for white rice, polishing machines, color sorters, etc., to achieve more functions and better rice milling results. So, what are the advantages of the new type of combined rice mill? Here is an introduction for everyone.

The separate design that removes impurities and stones is much better than the traditional integrated design.

2. The impurity removal part adopts a multi-layer reciprocating vibrating screen mechanism, which features high impurity removal efficiency and thorough cleaning.

3. The stone expulsion section adopts a design with high air volume and strong suction force, featuring a large air volume and excellent stone expulsion effect.

4. The machine body is equipped with high-strength shock-absorbing bearings, ensuring smooth, firm and reliable movement, with low vibration, low noise and less dust. The present invention integrates the variable speed reducer and the mobile roller device into one, avoiding the coordination problem of the swing gear. The one-time shell-breaking rate exceeds 90%, the service life of the rubber roller is longer, the operation and adjustment are convenient, the transmission efficiency is high, the noise is low, and the stability is high.

What is the operation method of the new type of combined rice mill? Let me continue to introduce it to you below.

Place the rice mill on the workbench, plug in the power supply, determine the whitening time and adjust the timing knob.

2. Remove the pressure from the hopper, take 17-20g of brown rice (with a moisture content not exceeding 15%) and put it into the hopper. Let it flow into the whitening chamber, press the power button to start, and then reduce the pressure.

After the specified time, the rice mill will automatically stop. First, take out the hopper and remove the husks. Then insert the funnel, release the pressure, turn the front side a little and you can smell the pure fragrance. Turn the front handle to the right and turn the handle to the right to make the polished rice in the rice milling room fall into it. Turn the timing knob to the 0 position, press the power button, let the grinding wheel idle for a few seconds to make all the rice grains in the whitening room fall off. Then, pull out the rice receiving hopper, sieve it and get the measured polished rice.

4. Before feeding, let it idle for 1 to 2 minutes. A uniform foil strip discharge channel is set up on the machine body, and the recycling of scattered foil strips has been modified in combination with the environmental protection department.

What are the application fields of the new type of combined rice mill? This rice mill is mainly used for milling millet and sorghum, and can also be used for husking and milling grains such as corn, wheat, barley, mung beans, buckwheat, soybeans, and millet, as well as for removing the husks of kochia seeds, Cyperi rhizome, and coix seed. Inside the husking machine, there are grinding wheels, screens and rice mills. There is a fan at the lower part of the base, and the chaff discharge channels are evenly distributed on the body. The feature of this machine is that the main shaft of the grain thresher is composed of a long shaft and a short shaft, and bearings are provided at the gap between them, which are respectively connected to the motor. The wheels on the long shaft are larger than the pulleys on the short shaft, and the fan is installed at its lower part. The sand mill and rice mill are a complete set of equipment.