Small rice milling machine: Are there any tips for rice milling machine malfunctions?

During the rice milling process, if the rice mill is not properly adjusted, it often leads to excessive broken rice and bran. So at this point, you should pay attention to strengthening the adjustment and maintenance of the rice mill, and promptly eliminate various faults that affect rice processing. Then, for small rice mills: Are there any tips for rice mill faults?

Small rice milling machine: Are there any tips for rice milling machine malfunctions?

1. Adjustment method without adjusting the rice bran: Adjust the fan speed to the rated speed. Adjust the air volume regulating plate to increase the air volume. Tighten the fan pulley to eliminate belt slippage. Replace the fan impeller to ensure air volume, etc.

2. Methods to increase the particle content in rice: Adjust the inlet gate, rice knife or press, rotate the rice knife, adjust the noodles or replace them, and replace the lid.

3. Method for adjusting the thickness of fine bran or grain leakage: Remove the contact surface between the cover and the base plate, and then lock the cover. Repair or replace the rice sieve, re-integrate the women's clothing, adjust the windshield, increase the air volume and reduce the wind speed.

4. Reduction: Adjust the pressure in the white chamber to ensure that the main shaft reaches the rated speed, replace the severely worn rollers, adjust the opening degrees of the inlet and outlet gates, and dry the raw grains.

5. Relocation blockage and troubleshooting methods: Adjust the opening degree and the opening degree of the outlet gate; Stop the vehicle and check if the sieve holes are clogged. When there are too many things, clear them out. Check the cause of the belt slippage and eliminate it in time.

6. Rice Grain Unemployment Method: Replace the drum; The rice knife by your side, use it or replace it. Avoid mixing raw grains of different varieties together. Adjust the inlet gate and the outlet gate correctly.

7. Over-adjustment method: Adjust the gap between the instrument and the opening degree of the discharge door to accumulate the chaff. Readjust the speed of the drum; Dry the raw grains or spray a small amount of water to make the raw grains meet the drying requirements and the humidity meet the processing requirements. Check the rice sieve. Ensure the installation conditions correctly.

8. Rice-free blending method: Dry raw grains; Unclog the ingredients, carefully select the raw grains, and remove impurities from the raw grains. Clear the sieve holes; Contact.

What are the common faults of small rice mills?

1. Bran separation. Adjust the rotational speed of the centrifugal fan to the rated speed, and adjust the exhaust volume regulating plate to increase the exhaust volume. Tighten the heart-shaped fan belt plate and remove the conveyor belt buffer. Remove the centrifugal impeller to ensure the exhaust volume. Check if the crank has come loose, if the rollers have separated from the turntable, and if the spacing adjustment is appropriate. Check whether the vibrating screen has fallen off.

2. Increase the flowing grains or rice in the fine bran. If you run away with vegetables or coarse chaff, you should remove WIDS and surface and keep using the range hood. Repair or remove the rice sieve; Reinstall and adjust the air deflector to increase the exhaust volume and reduce the air flow. If the amount of grain in the rice increases, adjust the inlet box, rice knife or pressure.

3. Reduce output. Adjust the white cavity pressure to ensure that the main shaft bearing exceeds the rated speed ratio. Replace the severely damaged rollers and readjust the opening degree of the export trade box plates.

4. Rice machine block. Adjust the opening where the outlet is inserted; Stop the vehicle to check if there is any obstruction. If it is necessary to clear the obstruction, it can be unobstructed. The entrance space can be accumulated. Check the drive belt and remove it immediately.

5. The accuracy of the millet grains is not appropriate. Removing the rollers is very simple. Use a rice knife on the head, adjust the facial mask, or remove the rice knife. Prevent the mixing and hybridization of different types of raw materials; Make appropriate adjustments to the imported box panels and the entrance box panels.

6. Excessive rice. Adjust the gap between the opening of the rice knife and the entrance box plate and accumulate it. Adjust the speed ratio of the drum again; Check the installation status of materials and screens to ensure they are installed correctly.

7. Do not leave the food behind. Enter the entrance, select the raw materials for the machine, and remove the dirt from the original grain. Input of circular hole sieve; This phase is out again because the three-phase wire joints are incorrect. This will not be able to reverse the condition of the meter.