What are the advantages of the new type of combined rice mill and the complete set of combined rice mills?

The complete set of combined rice milling machine consists of an inch rubber roller dehusker, a coarse grain separation screen, a sand roller rice milling machine, a broken rice separation screen and a lifting device. It has the effect of separating and grinding brown rice, is easy to operate, convenient to maintain, has high working efficiency and leaves little residue. This machine features a direct output function for brown rice, providing users with flexible functional combinations. Meanwhile, this machine can be used in conjunction with subsequent multi-stage separation screens for white rice, polishing machines, color sorters, etc., to achieve more functions and better rice milling effects. So, what are the advantages of the new type of combined rice mill: the complete set of combined rice mills?

What are the advantages of the new type of combined rice mill and the complete set of combined rice mills?

The separate design for removing impurities and stones is much better than the traditional integrated design.

2. The impurity removal part adopts a multi-layer reciprocating vibrating screen mechanism, which features high impurity removal efficiency and thorough cleaning.

3. The stone expulsion section adopts a design with high air volume and strong suction force, featuring a large air volume and excellent stone expulsion effect.

4. The machine body is equipped with high-strength shock-absorbing bearings, ensuring smooth, firm and reliable movement, with low vibration, low noise and less dust. The double-support mobile transmission dehusking machine integrates the variable speed reducer and the mobile roller device into one, avoiding the coordination problem of the swing gear.

5. The one-time shell-breaking rate exceeds 90%.

6. The rubber rollers have a longer service life, are easy to operate and adjust, have high transmission efficiency, low noise and high stability.

What is the operation method of the new type of combined rice mill?

Place the rice mill on the workbench and plug in the power plug.

2. Determine the whitening time and adjust the timing knob.

3. Remove the pressure from the hopper, take 17-20g of brown rice (with a moisture content not exceeding 15%) and put it into the hopper, allowing it to flow into the whitening chamber. Press the power button to start, and then reduce the pressure.

After the specified time, the rice mill will automatically stop. First, take out the hopper and remove the chaff. Then insert the funnel, release the pressure, turn the front side a little and you can smell the pure fragrance. Turn the front handle to the right. Turn the handle to the right to make the polished rice in the whitening chamber fall into the receiving hopper. Turn the timing knob to position 0, press the power button, and let the grinding wheel idle for a few seconds to allow all the rice grains in the whitening chamber to fall off. Then, pull out the rice-receiving hopper, sieve it to obtain the measured polished rice.

5. Let it idle for 1 to 2 minutes before feeding. A unified channel for discharging rice husks is set up on the aircraft body, and the recycling of flying rice husks is reformed in combination with the environmental protection department.

What are the application scopes of rice mills?

The rice mill is mainly used for milling millet and sorghum, and can also be used for husking and milling grains such as corn, wheat, barley, mung beans, buckwheat, soybeans, millet, kochia seeds, cyperi rhizome and coix seed. Inside the dehusking machine, there are grinding wheels, screens and a rice mill. There is a fan at the bottom of the machine base, and the chaff discharge channels are evenly distributed on the machine body. Its feature lies in that the main shaft of the grain thresher is composed of a long shaft and a short shaft, and a bearing is provided at the gap between the long shaft and the short shaft. The long shaft and the short shaft are respectively connected to the motor. The pulley on the long shaft is larger than that on the short shaft. The fan is installed at the lower part of the short shaft. The sand mill and rice mill are a complete set of equipment.