The household rice milling machine manufacturer will share some knowledge about using a complete set of rice milling machines with everyone

Household rice mill manufacturer: Do you know the stone removal process of a complete set of rice milling machines?

The complete set of rice milling machines is used to reduce the sand content in grains and improve the overall quality of rice. If the working performance of the gravity classification and stone removal machine is not understood, the stone removal effect cannot be improved.

When the materials enter the screen surface of the stone remover, the suspension degrees of rice grains and debris are different. With the vibration of the equipment and the upward airflow, rice and other grains will be suspended on the upper layer, while debris with a faster suspension speed will remain on the screen surface, thus achieving the purpose of classification. The air flow will increase the gap between the materials, reduce the positive pressure and friction between layers. This situation can be called the fluidized state. Make the classification more obvious.

The materials with low suspension velocity are at the upper layer and will be pulled by inertia, slowly sliding down to the outlet and being discharged outside the machine. During the process of the upper layer materials falling, the edge stones and other debris will be separated and enter the lower layer. The stones and debris below, whether there are suspended substances or not, will slide in a vibrating state on the line. At this time, the materials are in a semi-suspended state. When they slide to the upper screen surface, The rice grains will be blown back into the logistics by the blowing system, while the stones and debris will continue to be discharged to the outlet.

Household rice mill manufacturer: Causes and prevention methods of Rice mill explosion

The reason for the explosion of the rice mill is that the machine has been operating under overload for a long time. When the machine encounters rice with high moisture content, it will explode. In this case, first turn off the equipment and remove the screen for maintenance. To avoid this situation, try not to exceed the standard for a long time.

Avoidance methods

Do not process rice that is too wet. For materials with high moisture content, they can be processed together with dry materials, which can also reduce the number of explosions.

Dry materials with high moisture content in a dryer to reduce the moisture content to below 16%.

Rice milling machines are indispensable agricultural machinery in agricultural production. Their emergence and application have provided great convenience for agricultural production. By using complete sets of rice milling equipment, we can effectively separate impurities such as stones and leaves from grains, which not only improves the efficiency of grain processing but also saves labor.

Household rice mill manufacturer: What preparations should be made before starting a rice mill?

A small rice mill is a machine that uses mechanical force to remove the husk and whiten brown rice. Do you know what preparations need to be made before starting a rice mill? Next, the rice processing equipment manufacturer will introduce the preparatory work before starting the rice mill.

Before starting the rice mill, it should be installed stably. Check whether all components are normal, whether the components and their connections are loose, and whether the tightness of the transmission belt is appropriate. Pay attention to the lubrication of the transmission components. Only after checking that all the above components are normal can the switch be turned on.

2. Remove debris (such as stones, ironware, etc.). In the rice to be ground, there should be no overly long stones or iron sheets to avoid accidents. Check if the dryness or wetness of the rice meets the requirements. Then, insert the plug plate of the bucket tightly and put the rice into the bucket for pulping. The rice flows out from the bottom outlet of the grinding chamber, and the rice bran is discharged through the sieve holes of the rice sieve. The rollers of the horizontal sand roller rice mill are cylindrical. The import end is equipped with a propeller.

That's all for the explanation from the household rice mill manufacturer's editor. Thank you all for watching. If you need a household rice mill or rice milling machine, you can contact our company.