Now, the household rice mill manufacturer will talk about how to improve the working efficiency of the rice mill

Household rice milling machine manufacturer: How to improve the working efficiency of rice milling machines?

The main basis for adjusting the pressure zone is the grinding effect requirements of each working unit in the rice processing technology. The main purpose of adjusting the pressure zone is to ensure that the shelling rate of the equipment meets the process requirements. Regular maintenance of the processing equipment can improve economic benefits. When small rice mills are in operation, some impurities are often left in dead corners, which become very difficult to clean. These impurities will accelerate the wear and tear of small rice mills and also lead to a decline in the quality of flour processed by processing equipment.

For users of small rice mills, safety always comes first. Enterprises should produce high-quality equipment to ensure the safety of consumers' use and operation, and make consumers feel at ease. At the same time, it is necessary to extend the service life of the equipment, make operation and maintenance simple and convenient, minimize equipment maintenance time as much as possible, lower the long-term operating costs of enterprises, and do a good job in after-sales service. Only by ensuring the overall quality of the equipment can costs be reduced as much as possible, and simple and efficient mechanical equipment be produced. Only in this way can the overall level of the entire equipment industry be improved.

2. Ensure proper lubrication and sealing of the small rice mill to prevent it from overheating. It is also important to choose equipment produced by regular manufacturers. In recent years, the continuous innovation and development of small rice mills have not only largely reflected the value of rice but also met people's demands for finished rice processing equipment, playing an increasingly important role in our daily lives.

Household rice mill manufacturer: What preparations should be made before starting a rice mill?

Before starting the rice mill, the machine should be installed stably. Check whether the components are normal, whether the components and their connections are loose, and whether the transmission belt is elastic. When pulling the belt, it must be flexible. Pay attention to the lubrication of the transmission parts. Only after the above components are checked and found to be normal can the switch be turned on.

2. Remove debris (such as stones, ironware, etc.). There should be no overly long stones or iron sheets in the rice to be ground to avoid accidents. Check if the dryness or wetness of the rice meets the requirements. Then, insert the bucket's plug tightly and put the rice into the bucket to make pulp.

3. Before processing raw materials, they must be cleaned to prevent debris from entering the machine and causing damage.

After the machine starts, let it idle for 2 to 3 minutes. Once the machine operates smoothly, gradually open the feed door and the discharge door. When the particle quality and whiteness meet the requirements, the regulating plate can be fixed.

5. When milling rice, special attention should be paid to safety. The operator should stand in front of the feeding hopper, away from pulleys and belts to avoid accidents. If there is abnormal noise or a sudden increase in bearing temperature, the machine should be stopped immediately. The cause should be identified and the fault eliminated before resuming work.

Before shutting down the machine, the feed door should be closed first to ensure that all the food in the grinding chamber is discharged from the machine body before the machine stops.

That's all for the explanation from the household rice milling machine manufacturer's editor. Thank you all for watching. See you next time.