The manufacturer of small household rice mills believes that the rice mill is mainly composed of a fixed wrench, a nut tightening wrench, a brush, a hopper, a grinding wheel and a wire brush. The mechanical force generated by mechanical equipment is used for peeling and whitening brown rice. This kind of mechanical equipment is called a rice mill.

The small household rice mill manufacturer believes that the working principle of the rice mill is as follows: When the sample (brown rice) flows from the hopper into the rice milling chamber, due to the internal pressure and mechanical force, the brown rice is squeezed into the rice milling chamber. After self-friction and mutual friction between brown rice and the grinding wheel, the skin of the brown rice can be quickly removed, and the grade of whiteness measured for white rice can be achieved within the adjusted and determined time.

The manufacturer of small household rice mills believes that commonly used rice mills are classified into vertical rice mills and horizontal rice mills according to their overall structure. According to the functional characteristics of mechanical rice mills, they can be classified into two types: split-type rice mills and ordinary drum-type rice mills.

The manufacturer of small household rice mills believes that the vertical rice mill has a conical sand roller inside, with no ribs or grooves on the surface, and can move forward and backward. The gap between the mortar and its outer conical rice sieve can be adjusted through the up and down movement of the mortar shaft. Adjustable rubber blades are installed around the whitening room to reduce the flow rate of the rice and increase the speed of the rice and mortar. Adjusting the rice flakes can increase or decrease the degree of whitening. Rice flows out from the bottom of the rice milling chamber, and rice bran is discharged through the rice sieve.

The manufacturer of small household rice mills believes that the MNTL series rice mills adopt the international advanced technical standards for rice mills and are one of the most widely used modern rice mills in the world. The rice mill features high whiteness and low breakage rate, and is widely used in rice mills and rice milling machines. The MNTL series vertical rice mill can also be used as a polishing machine, replacing the emery grinding roller with a polishing roller.

The manufacturer of small household rice mills believes that the features of the MNTL series rice milling machines

(1) When discharging and feeding materials, excessive white grinding pressure should be avoided.

(2) The winch is eliminated, and multiple machines can be connected, making the milled rice whiter and shinier. It is also equipped with current and negative pressure displays for easy control.

(3) The fluidized rice milling device makes the rice milling more gentle, reduces the rate of broken rice, and increases the yield of white rice.

(4) It has a long service life. The multi-functional instrument is easy to maintain and operate. It can be used as a polishing machine when there is moisture in the grinding.

(5) Utilizing the remaining germ to process nutritious rice is a very good choice.

The manufacturer of small household rice milling machines believes that MNTL products have advantages in rice processing equipment

(1) The height of the rice flow in each vertical rice mill is basically the same, so the overall vertical pressure does not change much. Only by controlling the pressure of whitening can the whitening effect be guaranteed.

(2) During the process of discharging the rice bran from each vertical section, the flow rate of the rice slows down and the whitening pressure decreases, meeting the requirements of whitening processing.

(3) Due to the fluidization of the rice flour flow, the whitening pressure of the granular rice flour grinding equipment is relatively weak. It will cause less damage to rice, thereby producing rice with less damage.

(4) Small household rice milling machine manufacturers believe that since the flow direction of rice is opposite to the direction of gravity, the rice is in a vertical state and parallel to the roller axis, resulting in a low breakage rate.