The manufacturer of small household rice mills believes that the rice produced by ordinary rice mills can no longer meet people's needs, and the nutritional value of germ rice is higher. The embryo retention rice mill is one of the future development trends. From the perspective of processing principles, the variety of brown rice, the characteristics of raw materials, the freshness of the rice, the number of whitening passes of the rice mill, the gap of the drum, the length of the drum and the speed of the drum all affect the yield and quality of rice with germ.

The manufacturer of small household rice mills believes that in order to further enhance the whitening effect of the retained germ rice mill and the retention rate of brown rice, it is necessary to comprehensively optimize the above aspects when developing the retained germ rice mill and adjust the parameters and structure of the traditional rice mill. For instance, reducing the pressure in the rice milling chamber, arranging the brown rice in an orderly manner in the chamber, and minimizing the tumbling of the brown rice, etc. It can achieve the goal of improving the embryo retention rate. This germ rice mill has the advantages of rapid rice milling and multi-pass rice milling. Meanwhile, the embryo retention rice mill should adopt a combined application method of sand rollers and iron rollers. During the rice milling process, a blower system should be adopted to guide the rice husks under negative pressure to reduce the blockage of the rice mill's passage.

The manufacturer of small household rice mills believes that the preparations before starting the rice mill:

Before starting the entire machine, it should be installed stably. Check whether the components are normal, whether the components and their connections are loose, and whether the drive belt is elastic. The belt must be pulled flexibly. Pay attention to the lubrication of the transmission parts. Only after checking that the above-mentioned parts are normal can the switch be turned on.

2. Remove debris (such as stones, ironware, etc.). The manufacturer of small household rice mills believes that in the rice to be ground, there should not be too long stones or iron plates to avoid accidents. Check if the dryness or wetness of the rice meets the requirements, then insert the plug of the bucket tightly and put the rice into the bucket to beat evenly.

The small household rice mill manufacturer believes that the technical requirements after the rice mill is started are:

Turn on the power and let the rice mill idle for 1 to 3 minutes. After the operation is stable, slowly pull out the blanking plate and start working.

2. Check the quality of the rice at any time. The manufacturer of small household rice mills believes that if the quality does not meet the requirements, adjust the discharge plate or the gap between the rice cutter and the grinding core. Method: If there is a large amount of grain, first adjust the grain unloading plate and appropriately reduce the rice outlet. (If the rice outlet is reduced, there is still a large amount of grain.) Then the gap between the rice cutter and the grinding core should be reduced. If there is a large amount of broken rice, the rice outlet (or the gap between the rice knife and the grinding core) should be enlarged.

After using the rice mill for a period of time, if it becomes less sharp due to wear and tear, turn it over. If the rice sieve leaks rice, a new one should be replaced. The manufacturer of small household rice threshers believes that when the husking rate of the thresher decreases, the interval between the two rubber rods should be adjusted. If the adjustment is ineffective, the rubber stick should be replaced.

4. The manufacturer of small household rice mills believes that when the rice milling is completed, the plug plate of the grain hopper should be tightly inserted first to ensure that all the rice in the rice milling room is milled out, and then the power supply should be cut off after it is discharged from the body.