The small rice mill uses rice or brown rice as the raw material. The rice is discharged from the silo and enters the screw conveyor through the total flow regulation mechanism for grinding, maintaining the processing of agricultural and sideline products for the processing of edible rice. At present, there are many small mills on the market. If we say that the differences among various well-known brands of rice mills are undoubtedly quite significant, they are generally not noticeable from the appearance. So, how should one choose this small rice mill?

The key lies in the quality. The various parts of the small rice mill are not securely fastened, such as the V-belt, whether it is reliable to use well-known brands, the frame structure is not firm, and then there is the surface paint. Whether the material is bright or not, this reference all depends on people, and the number of V-belts is also a reference. The size of the body is also a criterion. Each level has many aspects, and most of them are not afraid of comparison. If you compare it, it looks very different. Generally, for slightly well-known brands, quality is more important. People who buy small rice mills are actually similar to those who buy clothes. It's a good deal. Clothes and trousers are definitely different from expensive ones. Everyone just needs to take a close look. On closer inspection, there are still significant differences between the two. The quality varies at each level. I'm afraid you can take a close look. As long as you are careful, every silo, every layer of support frame and all its components can be reference points. They are different. First of all, people will see whether the knot is firm. Click on the parts of each level with your fingers. Generally speaking, slightly average well-known brands can undoubtedly be suppressed, while more solid and better well-known brands are undoubtedly good. When suppressing, it is thicker than the price. This is our criterion for distinction.

Solutions to the problem of slow speed of small rice mills:

The speed of the small rice mill is relatively slow. The main reason is: 1. The working voltage is relatively low. In this case, if the motor cannot withstand it, the motor speed ratio will decrease. People need to take a look at switching power supplies. Is it that the distance between the electricity meter and the person's motor is too far, or is the distance between the person's electricity meter and the motor relatively small? Generally speaking, small rice mills all belong to high-power rice mills. It is stipulated that the power plug should exceed the cable by more than 4 square meters. This is a key reference. It is a special type and should be transported via dedicated lines. It is incomparable with household appliances such as light bulbs that have relatively low output power. It should have a shorter distance and a thicker cable.

2. The slow speed is due to the unclean rice. The import volume of small rice mills is very small. There is too much rice inside the person and they can't get through. The principle of a small rice mill is that the raw materials are extruded into shape through the feeding screw. If there is gas in the middle, the actual effect will undoubtedly not be that good. Needless to say, the speed is very slow, so we need to check whether people's rice is clean. If it is not good enough, please clean it with a Dutch windmill air separator before starting the rice milling.

3. Do not disassemble or replace spare parts to damage the small rice mill

The key part of a small rice mill is the rice sieve. The rice sieve will be damaged if it is squeezed for a long time. If not replaced, rice is very likely to be crushed and get dirty. If it gets into the rice husk, this rice sieve must be damaged. Pay attention to checking and replacing at all times and in all places. Another issue is that the parts of the rolling bearing will be damaged after rotating at high speed for a certain period of time. If a loud noise is detected, the equipment needs to be stopped immediately. After the management institution is closed, check whether the rolling bearings are damaged and turn on the equipment. The human body will be inspected. If the rolling bearing is damaged, it will be replaced. If it is not damaged and unsalted butter is added, it can be applied to people's devices. Regular maintenance can ensure the normal operation of all equipment. If the equipment is not maintained for a long time, the probability of damage is very high. Therefore, ordinary farmers must pay attention to this point.