With the continuous development of the agricultural economy, the application of complete sets of rice milling machines and complete sets of rice milling equipment is becoming increasingly widespread. Which brand of complete rice milling equipment is good? The following equipment operation procedures are of great significance to production. Let's take a look together.

I. Preparations before Starting the complete set of rice milling equipment
Before starting the entire machine, please install it stably, check whether the parts are normal, whether the parts and their connections are loose, and whether the drive belt is tight enough. It must be flexible when pulled. Only after inspecting all the above parts can each transmission component be lubricated.
2. Remove any debris from the rice to be milled to prevent any accidents. Check if the dryness or wetness of the rice meets the requirements, then insert the rice bucket insert plate tightly and put the rice into the rice bucket to make pulp.

Ii. Technical Requirements for Complete Sets of Rice Milling Equipment after Startup
Connect the power supply, let the rice mill idle for 1 to 3 minutes until it runs stably, then slowly pull out the feeding blade for cutting, and then put it into use.
2. Always check the quality of the milled rice. If the quality does not meet the requirements, the discharge blade can be adjusted or the gap between the rice knife and the grinding core can be adjusted. The method is as follows: If there is too much grain, first adjust the discharge plate to appropriately reduce the rice outlet. If the rice outlet is adjusted to be smaller but still contains more grain, the gap between the rice knife and the grinding core must be adjusted to be smaller. If there is a lot of broken rice, the gap between the rice outlet or the rice cutter and the heart grinder should be increased.
After using the rice milling knife for a period of time, if it becomes dull due to wear and tear, you can turn the rice milling knife over for use. If any rice leaks out of the sieve, it should be replaced with new ones. If the peeling rate of the rice husk peeler decreases, the interval between the two rubber rods should be adjusted. If the adjustment is ineffective, the rubber rod should be replaced.
4. When the rice milling is completed, please first tighten the paddle to crush all the rice in the grinding chamber, and then cut off the power supply after the machine discharges.

Iii. Maintenance of Complete Rice Milling Equipment after Shutdown
If the temperature of the bearing box is found to be too high, lubricating oil (such as grease) should be added.
2. Conduct a complete and detailed inspection of the main body.
3. It is strictly prohibited for those who are not familiar with the operation and maintenance of the rice mill to carry out construction operations to avoid unnecessary losses.
Which brand of complete rice milling equipment is good? Changzhou Wujin Shuanghu Grain and Oil Machinery Co., Ltd. is a professional manufacturer of complete rice milling machines and complete rice milling equipment. If you have any needs, please feel free to consult us.