• Time of issue:2020-04-16
• Views:

(Summary description)If a small rice mill is relatively slow, the key reasons are: First, the working voltage is relatively low. Under such circumstances, the motor cannot handle it, and its speed ratio will decrease. People need to check the switching power supply, whether the distance from the electricity meter to the motor is too long, or whether the cable between the electricity meter and the motor is too thin. Generally speaking, small rice mills all belong to those with high power. For those with high power, it is stipulated that the power plug of the cable should be larger than 4 square meters. This is a crucial reference. All of them must be dedicated lines for transportation. They are not like light bulbs or other household appliances with low output power. They must have short spacing and relatively thick cables. Second, the reason for the relatively slow speed is that the rice is not clean. Since the inlet of the small rice mill is very small, if there is a lot of rice in people's rice, it cannot be smooth. The principle of the small rice mill is that the raw materials are extruded out after passing through the feeding screw. If there is air entering in the middle, the effect is undoubtedly not good, needless to say. And the speed is also slow. Therefore, we need to check whether people's rice is cleaned up neatly. If not, use a Dutch windmill to clean it up before starting the rice milling. Small rice mill Not replacing spare parts can cause damage to the small rice mill The key component of the equipment is the rice sieve. After long-term compression, the rice sieve will be damaged. If it is not replaced, the rice is very likely to be not milled clean and get into the bran. This rice sieve must be inspected and replaced at any time. Then there are also spare parts such as rolling bearings. After rotating at high speed for a certain period of time, they will be damaged. If you find a loud noise, you need to stop the equipment immediately, remove the administrative organ and check whether the rolling bearing is damaged. You need to open the equipment for inspection. If the rolling bearing is damaged, it should be replaced If there is no damage and unsalted butter is added, people's equipment can be used. Regular maintenance is necessary to ensure the normal operation of the equipment. If it is not maintained for a long time, the probability of equipment damage is very high. Therefore, farmers must pay attention to this important point.