Rice milling equipment manufacturer: check before the rice beater starts-which is the best complete set of rice milling equipment

Release time:

2020-08-18

Rice milling equipment manufacturer: check before the rice beater starts-which is the best complete set of rice milling equipment? (1) Before starting the machine, please turn the pulley by hand, there should be no paper jam, and then tighten the pulley again with a wrench to prevent loosening during work, and there is no violent vibration when starting. (2) Turn on the paper feed tray, then turn on the power, and then start feeding paper after normal operation. 3 Adjustments in use (1) feed flow adjustment. When working, pour the rice into the hopper and run for about 5 minutes. Pull the bezel apart and tighten it with the set screws. Then turn the tune.

Rice milling equipment manufacturer: check before rice beater starts-Complete sets of rice milling equipment which is goodWhat?

（1) Before starting the machine, please turn the pulley by hand, there should be no paper jam, and then tighten the pulley again with a wrench to prevent loosening during work, and there is no violent vibration when starting.

（2) Turn on the paper feed tray, then turn on the power, and then start paper feed after normal operation.

3Adjustments in use

（12) Feed flow adjustment.

When working, pour the rice into the hopper and run about5Minutes. Pull the bezel apart and tighten it with the set screws. Then turn the adjustment handwheel to adjust the flow. When the flow reaches the rated flow, stop the regulation. The opening degree of the flow regulating plate can be displayed on the scale by means of an external indicator needle.

（23) Adjust the meter accuracy.

The accuracy of the finished rice is determined by the pressure spring of the resistance mechanism, and the spring pressure can be adjusted by the handwheel at the end of the spring. The operator can appropriately adjust the handwheel at the end of the spring according to the actual situation to reduce or increase the outlet pressure to make the rice reach the required accuracy.

In addition, pay attention to adjusting the position of the air volume adjustment handle on the right side of the barrel to control the air volume. If the wind is too strong, the rice grains will be absorbed by the chaff; If the wind is too weak, the finished rice will contain chaff. Appropriate adjustments can be made according to the actual situation during use to completely separate the rice bran.