Household rice beater manufacturers to introduce the maintenance and adjustment of small rice beater


Release time:

2022-01-26

Household rice beater manufacturers to introduce the maintenance and adjustment of small rice beater Adjusting the rice knife is to adjust the gap between the rice knife and the drum. If the gap is large, the pressure in the rice milling chamber is small, and the friction of the rice in the drum is weak, so the rice beater cannot grind finely, but the rice yield is high.

Household Rice BeaterThe manufacturer introduces the maintenance and adjustment of the small rice beater.

Household Rice BeaterManufacturer: maintenance and adjustment of small rice beater

1. adjusting the rice knife is to adjust the gap between the rice knife and the drum. If the gap is large, the pressure in the rice milling chamber is small, and the friction force of the rice in the drum is weak, so the rice beater cannot grind finely, but the rice yield is high.

Adjustment of 2. inlet and outlet knives

When the import knife is opened and the export knife is closed, the grain in the rice milling room will increase and the pressure will increase, but the milled rice will be beige and white, but the broken rice will be more. On the contrary, if the import knife is turned down, the export knife is turned up, there is less rice stored in the rice milling room, the pressure is lower, and the rice milling will be rougher.

Three. Specific adjustment measures

(1) The adjustment gap between the rice cutter and the drum should be moderate. Generally, the gap should not be less than the transverse diameter of the rice grains, otherwise the rice grains will be easily broken; the gap should not be greater than the longitudinal diameter of the rice grains, otherwise the rice grains will be rough. Therefore, the gap between the rice cutters should be selected between the longitudinal and transverse diameters of the rice grains. Generally, when the gap between the rice cutters is actually adjusted, there should be a slight bevel, that is, the knife end near the exit is slightly larger, so that the polished rice will be more complete.

2hR1moazRq6-oXNEm7Q6nA.jpg

(2) The inlet knife and the outlet knife should be closely matched. The opening of the inlet knife can generally be controlled at 1/2 of the whole opening, not more than 2/3. In the process of rice milling, it is generally not necessary to take off the inlet knife and let the inlet open completely, because after the inlet knife is fully opened, too much grain is accumulated, the pressure in the rice milling chamber is too high, and the rotation resistance is large, the transmission belt will slip and the machine will be stuck or damaged. The outlet knife should be flexibly controlled. When in use, the gap between the rice knife and the inlet knife edge should be adjusted according to regulations before it can be fixed. Generally, as long as the robot hand takes out the knife with its right hand and the left palm is connected with the rice grains at the lower end of the outlet, observe whether the rice grains are complete and whether the beige is white. If the rice is broken, open, in the process of rice milling, both, milling quality can meet the requirements.

Four. MAINTENANCE MATTERS

(1Household Rice BeaterThe processed rice should maintain a certain degree of dryness, and the water content should not be greater than 14%-15%. When the water content of the rice is too high, the rice grains will be broken, which will affect the quality of the rice and increase the consumption power.

(2) Pay attention to inspectionHousehold Rice BeaterWhether there are nails, stones and other sundries in the rice to avoid blockage or damage of the rice sieve caused by entering the rice milling room.

(3)Household Rice BeaterBefore starting up, check the rice sieve, rice knife, roller core and other parts to see if the bolts and nuts are tightened.

(4) Turn the drum before starting the machine to see if there is any blockage.

(5) When the machine is started, run to normal speed with no load, then pour the rice into the hopper, and pay attention to the operation of the rice beater at any time.

(6) After work every day, check the rice beater and supporting facilities once, and deal with the problems found in time to ensure that the rice beater is always in good condition.

All right.Household Rice BeaterThe manufacturer's editor will explain here today. Thank you for watching. I hope the above introduction will be helpful to you. If you need a rice beater, please contact our company.