Household rice machine maintenance methods?

Release time:

2023-02-01

With the continuous progress of science and technology, all walks of life have also been greatly developed. The development prospect of household rice beater is also very good. Therefore, the demand is increasing and many manufacturers have been added to the market. As manufacturers, it is also necessary for us to tell you about the maintenance methods of household rice beater. Interested partners can come and have a look.

Before we use this household rice beater, we also have a lot of problems with everyone, so if we want to use it better, we must understand some of its knowledge points. First of all, you must be clear that when using a household rice beater, you must carefully check the outer surface of the motor. Of course, it is recommended to check whether the external fasteners of the motor are loose, whether the parts are damaged, whether there are oil stains and rust on the surface of the equipment; motor contacts and check whether there are discoloration, burns and smoke marks at the connections. It is recommended that you also listen carefully to the noise inside the motor: check electromagnetic noise, ventilation noise, mechanical friction sound, bearing noise, etc. Inside the household rice beater to determine the cause of the engine failure. Touch the surface of the rice processing machine casing with your hands to feel whether the motor temperature is too high and whether there is vibration. And it can also detect burning smell and odor during maintenance: check the motor overheating, winding burning, single-phase operation, winding failure, bearing failure, etc. Will produce these burning odors. In addition, it is necessary to strengthen the daily maintenance measures of rice processing machinery: take timely corrective measures for the problems found in the inspection, tighten, wire, disassemble and assemble the household rice beater, and carry out inspection, cleaning and maintenance according to regulations. With the maintenance cycle.

The roller device of the household rice beater is concentric with the main shaft during maintenance, and the dynamic and static balance is well done. When assembling the air jet roller, the air jet groove is aligned with the air jet hole on the main shaft to prevent misalignment. The fins of the propeller and iron cylinder also need to be replaced in time after wear. Rice sieve is generally used in a class, back and forth or around the exchange. Rice knives and pressure bars are generally used in one shift and can be rotated up and down or replaced during the period. The rice knife addition amount of the household rice beater can be slightly higher at the entrance of the bleaching chamber and slightly lower at the exit. After all this is completed, the regulating parts such as the rice pressure gate, the feed regulating valve, the rice knife advance and retreat regulating screw, and the gas storage regulating mechanism can be adjusted. Stay flexible. When feeding, the screen is kept intact, and the blockage on the screen is cleaned after each shift to keep the feed unblocked. Of course, the tightness of the transmission belt should also be checked frequently, such as jet rice machine and double-roller rice machine. Pay special attention to the tightness of the main shaft transmission belt on the household rice machine. Space to drive the lower space main shaft or drive the fan main shaft.

The content of the above article is about the maintenance method of the household rice beater for all friends, and a better manufacturer of the household rice beater is also shared in the content. If you have any needs in this respect, you can check it out, hoping to bring help to you.